Druga oprema za varjenje SIEGMUND Extreme 8.7 2400 x 1200
PDF
Objavi
Facebook
WhatsApp
Viber
Telegram
Vam je oglas zanimiv?
1/2
PDF
Objavi
Facebook
WhatsApp
Viber
Telegram
Cena:
na zahtevo
Pošljite povpraševanje
Kontaktirajte prodajalca
Tip:
druga oprema za varjenje
Lokacija:
Nemčija Niederlangen
Datum objave:
več kot en mesec
Id.št. zaloge trgovca:
1125-5183X
Stanje
Stanje:
nov
Oddaljen pregled
Dostavna služba za vozila
Važno
Ta ponudba je samo orijentacijska. Prosimo, da se za natančnejše podatke usmerite na prodajalca.
Nasveti za nakup
Kontaktirajte prodajalca
Naročite se na prodajalca
Jürgen Suntrup
Jeziki:
nemški, angleški
+49 5939 9...
Pokaži
+49 5939 940640
+49 5939 9...
Pokaži
+49 5939 940650
Naslov
Nemčija, Spodnja Saška, 49779, Niederlangen, Fresenburger Weg 4
Lokalni čas pri trgovcu:
07:31 (CEST)
Pošlji sporočilo
Kontaktirajte prodajalca
Heinz Sanders GmbH
Nemčija
1 leto pri Machineryline
5.0
5 mnenj
Naročite se na prodajalca
+49 5939 9...
Pokaži
+49 5939 940640
+49 5939 9...
Pokaži
+49 5939 940650
Vprašajte prodajalca
PDF
Objavi
Facebook
WhatsApp
Viber
Telegram
Prodajate mehaniacijo ali vozila?
To lahko storite z nami!
Podobni oglasi
cena na zahtevo
2000 m/h
Moč
1.02 KM (0.75 kW)
Nemčija, Niederlangen
Kontaktirajte prodajalca
cena na zahtevo
Moč
1.02 KM (0.75 kW)
Nemčija, Niederlangen
Kontaktirajte prodajalca
cena na zahtevo
2021
Nemčija, Kirchhundem
Kontaktirajte prodajalca
table width 1200 mm
table height 200 mm
weight of the machine ca. 1,0 t
table length 2400 mm
table width 1200 mm
table height 200 mm
The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.
The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.
The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.
The welding tables are provided with scale as standard.
Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tischbreite 1200 mm
Tischhöhe 200 mm
Maschinengewicht ca. 1,0 t
Tischlänge 2400 mm
Tischbreite 1200 mm
Tischhöhe 200 mm
Der Tisch Professional Extreme Artikel-Nr. 4-280030.XD7 2400x1200x200 mm hat
eine Lochanordnung im 100 mm Raster auf der Tischplatte und eine parallele
Lochanordnung im 50 mm Raster an den Seiten.
Die Bohrungen haben einen Durchmesser von 28 mm und der Tisch eine
Materialstärke von ca. 24,5-27 mm. Die Tischplatte wird aus durchgehärtetem
Werkzeugstahl gefertigt.
Die wenig beanspruchten Seitenwangen werden aus Kostengründen weiterhin aus
Stahl S355J2+N gefertigt. Rasterlinien im Abstand von 100 mm erleichtern Ihnen
den Aufbau Ihrer Vorrichtung.
Die Schweisstische sind standardmässig mit Skala versehen.
Inklusive 4x Füsse Grundausstattung 650 Artikel-Nr. 280858.X